What are the effects of contaminated water on human health?
Drinking water sources can become contaminated, necessitating treatment to remove disease-causing substances!
Contamination of drinking water sources can occur both in the source water and after it has been treated in the distribution system. Natural chemicals and minerals (for example, arsenic, radon, and uranium), local land use practices (fertilizers, pesticides, and concentrated feeding operations), manufacturing processes, and sewage overflows or wastewater releases are also potential sources of water contamination.
If you think your drinking water is tainted, have it analyzed by a lab to see what contaminants are present. Once you've recognized the issues, you'll be better able to determine what kind of filter you'll need.
There are a few symptoms to look for, before ordering a water analysis that indicate your water is dangerous to drink:
1: Sediment and dirt
Have you ever seen sand, dirt, clay, or other particulates suspended in your tap water or drinking water, settling in the sink's bottom?
These particles aren't always hazardous, but they're certainly unappealing. To solve the problem, consult a Water Treatment Expert at Netsol Water.
2: Foamy and cloudy water
If your water appears hazy, don't drink it. The water you drink should always be clear. Minerals in purified water should be imperceptible to the human eye because their quantity is measured in parts per million/billion.
3: An unappealing smell of Chlorine
To destroy bacteria, water treatment facilities typically add trace amounts of chlorine to drinking water. This works in the same manner as adding chlorine to a swimming pool. However, excessive amounts of chlorine can occasionally leak into your water supply during the treatment process, causing intestinal irritation and other major health problems.
4: Orange or brown tint
The presence of an excessive amount of iron or manganese in your water is usually indicated by the presence of brown or orange colored water. Mining or excavation near water supplies is the most typical cause, however rusted water lines can also cause this.
5: Silverware with Rust
Too much iron in your water is often indicated by tarnished and corroded cutlery. While you're doing the dishes, iron attaches to your cutlery and oxidizes (or rusts) once it's exposed to the air.
If your water doesn't have an odd tint, there's a slim chance it contains deadly levels of iron. The insides of your pipes and faucets, like your silverware, may rust with each usage of water, resulting in pricey repairs down the road.
6: Standing Water with an Oily Film
Oily film residue on top of standing water in your sink, toilets, or tubs is a significant indicator that your water source contains oil or grease. A water main leak, inadequate water treatment, and poor filtration are all possible reasons.
7: Tastes metallic
The taste of pure drinking water is unappealing. If your water has a metallic or bitter taste, it could be contaminated with dangerous substances such as pharmaceuticals, pesticides, or industrial chemicals.
8: Not so aroma of Sulphur
It's natural for traces of sulphur to show up in your underground water source because it exists naturally in the ground. Low levels of sulphur in your drinking water, like chlorine, cause little to no damage when consumed. Ingesting large levels of sulphur in your water, on the other hand, can be exceedingly harmful to your health.
Fortunately, the most dangerous component of sulphur (hydrogen sulphide gas) emits a strong, persistent, and unpleasant odour that smells like rotten eggs, alerting you to its existence. Bacteria is frequently confused with sulphur.
What are the symptoms of drinking contaminated water?
To begin, it's crucial to understand that the health effects people encounter may or may not appear immediately. Furthermore, the intensity of the actual impacts observed is determined by characteristics such as the person's overall health, age, and physical condition.
Following are some of the most regularly reported concerns associated with consuming polluted or contaminated water:
1: Problems with the Gastrointestinal System;
2: Diarrhea;
3: Intestinal or Stomach Cramping Nausea;
4: Aches and pain in the intestines or stomach;
5: Dehydration;
Note: Keep in mind that just because no signs or symptoms are present does not rule out the possibility of long-term consequences.
What can I do if I'm not sure whether my water is safe or not?
You can conduct a water test, as it is one of the simplest ways to determine whether your tap or drinking water is safe and free of contaminants.
Water testing can be performed by an experienced water purifying firm in your area. You can also test water used for residential, commercial, and retail uses, including city and well water. The results of the test will reveal exactly what is in your water.
Second, the test will reveal what steps you can do to improve your performance. Installing high-quality Reverse Osmosis Plants and Water Softeners, such as one from Netsol Water, in your house or company is a crucial step.
Netsol Water is Greater Noida-based leading water & wastewater treatment plant manufacturer. We are industry's most demanding company based on client review and work quality. We are known as best commercial RO plant manufacturers, industrial RO plant manufacturer, sewage treatment plant manufacturer, Water Softener Plant Manufacturers and effluent treatment plant manufacturers. Apart from this 24x7 customer support is our USP. Call on +91-9650608473, or write us at enquiry@netsolwater.com for any support, inquiry or product-purchase related query.